Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
vampire:vsa-v4:peripherals [2019/12/01 00:18]
muaddib [USB-A]
vampire:vsa-v4:peripherals [2020/03/06 09:52] (current)
muaddib [SPI-capable Expansion Ports]
Line 1: Line 1:
-====== Peripherals for the Vampire Standalone (V4======+====== Peripherals for the Vampire Standalone V4 ======
  
 {{page>vampire:ide&nouser}} {{page>vampire:ide&nouser}}
Line 5: Line 5:
 ===== SPI-capable Expansion Ports ===== ===== SPI-capable Expansion Ports =====
  
-  * These are the left and right Expansion Ports (''IO Header #1'' and ''IO Header #3'' {{:pcb_v4_up_details_r9.jpg?linkonly|here}}).+  * These are the middle and right Expansion Ports (''IO Header #2'' and ''IO Header #3'' {{:pcb_v4_up_details_r9.jpg?linkonly|here}}).
   * The following devices can be connected to these ports:   * The following devices can be connected to these ports:
-      * [[vampire:vsa-v4:ethernet|Ethernet modules]]+      * [[vampire:vsa-v4:enc28j60|ENC28J60 Ethernet Module]]
  
 ===== I2S-capable Expansion Port ===== ===== I2S-capable Expansion Port =====
  
-  * This is the middle Expansion Port (''IO Header #2'' {{:pcb_v4_up_details_r9.jpg?linkonly|here}}).+  * This is the left Expansion Port (''IO Header #1'' {{:pcb_v4_up_details_r9.jpg?linkonly|here}}).
  
 The following I2S devices were tested successfully with this port: The following I2S devices were tested successfully with this port:
Line 31: Line 31:
     * When connecting to the I2C port, the module must face towards the center of the board.     * When connecting to the I2C port, the module must face towards the center of the board.
  
-===== 68K Bus Expansion =====+==== Pinout ====
  
-  * All 68K signals are available in this socket.+The pins are numbered from left to right based on the board schematics {{:pcb_v4_up_details_r9.jpg?linkonly|here}}. 
 + 
 +^ Connector Pin ^ Function ^ 
 +| 1 | +3.3V | 
 +| 2 | SDA | 
 +| 3 | SCL | 
 +| 4 | NC | 
 +| 5 | GND | 
 + 
 +===== 68k Bus Expansion ===== 
 + 
 +  * All 68k signals are available in this socket.
   * Theoretically, a Zorro II bridge could be built for this socket, which would allow connecting Zorro cards to the Vampire.   * Theoretically, a Zorro II bridge could be built for this socket, which would allow connecting Zorro cards to the Vampire.
  
Line 63: Line 74:
   * At the hardware level, the USB input device signals are translated to classic Amiga input device signals. Therefore, the input devices are available to AmigaOS immediately upon booting the Kickstart, without the OS having to load a USB stack.   * At the hardware level, the USB input device signals are translated to classic Amiga input device signals. Therefore, the input devices are available to AmigaOS immediately upon booting the Kickstart, without the OS having to load a USB stack.
     * A USB mouse is mapped to a "virtual" Amiga mouse that is connected to a DB-9 port.     * A USB mouse is mapped to a "virtual" Amiga mouse that is connected to a DB-9 port.
-      * Left, right and middle mouse buttons work just like an Amiga mouse.+      * Left, right and middle mouse buttons, as well as the mouse scroll wheel, work just like an Amiga mouse.
     * A USB keyboard is mapped to a "virtual" Amiga keyboard.     * A USB keyboard is mapped to a "virtual" Amiga keyboard.
       * The **left** <key>⊞ Win</key>dows logo key is mapped to the **left** <key>**//A//**</key>miga key.       * The **left** <key>⊞ Win</key>dows logo key is mapped to the **left** <key>**//A//**</key>miga key.
Line 79: Line 90:
   * Compatible with Amiga, Atari and Commodore 64 joysticks.   * Compatible with Amiga, Atari and Commodore 64 joysticks.
     * Works with one-button and two-button joysticks.     * Works with one-button and two-button joysticks.
 +  * Amiga CDTV remote controllers (connected using an appropriate IR adapter) behave like a two-button joystick.
   * Amiga CD32, Sega Master System and Sega Genesis (Mega Drive) joypads behave like a two-button joystick.   * Amiga CD32, Sega Master System and Sega Genesis (Mega Drive) joypads behave like a two-button joystick.
   * You can enable the third fire button on a Sega Genesis (Mega Drive) joypad by rewiring it.   * You can enable the third fire button on a Sega Genesis (Mega Drive) joypad by rewiring it.
Line 85: Line 97:
   * The two ports allow up to two players to connect.   * The two ports allow up to two players to connect.
   * Amiga mice do not work.   * Amiga mice do not work.
 +
 +===== Mini-B USB =====
 +
 +The Vampire's power adapter must be connected to this port.  Any compatible power adapter works, but its output must have the following rating:
 +
 +  * Voltage: 5.0V or 5.1V.
 +  * Current: 0.5A or higher.  (Higher values are better, like 2A.)
  
 ===== Cases ===== ===== Cases =====
Line 93: Line 112:
   * [[https://www.checkmate1500plus.com/|Checkmate A1500 Plus Case]]   * [[https://www.checkmate1500plus.com/|Checkmate A1500 Plus Case]]
   * [[https://www.a1200.net/|Amiga 1200 Case]]   * [[https://www.a1200.net/|Amiga 1200 Case]]
 +  * [[https://www.thingiverse.com/thing:2466654|Acrylic Case]]
 +  * [[https://www.thingiverse.com/thing:4147197|Acrylic Case AROS Version]]
 +  * [[https://github.com/jbilander/Vampire_V4_Standalone_Enclosure|A Classic Amiga Enclosure]] (for 3D printing)
 +  * [[https://gumroad.com/l/project_julia/|Amiga Evolution: Project Julia]] (for 3D printing)
 +
 +Note that these third-party cases have not been quality-checked by the Apollo Team, so use them at your own risk.
  
 ---- ----
Last modified: le 2019/12/01 00:18