Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
amigaos314 [2019/10/24 11:11]
bax [Kickstart 1.3 with SCSI.device]
amigaos314 [2019/11/11 09:04] (current)
muaddib [FlashROM on Apollo-Core FPGA Cards]
Line 33: Line 33:
   C:​VampireFlash314 Devs:​Kickstarts/​kick.a1200   C:​VampireFlash314 Devs:​Kickstarts/​kick.a1200
  
-Please replace the example path of the Kickstart image by the actual location on your harddrive. The tool will need about 5 minutes to compress the Kickstart image after a quick verification of Flash chip type and Kickstart location within it. The flashing may commence after the compression was finished. Please confirm the flashing procedure with YES (as shown, in caps), followed by Return.+Please replace the example path of the Kickstart image by the actual location on your harddrive. The tool will need about 5 minutes to compress the Kickstart image after a quick verification of Flash chip type and Kickstart location within it. The flashing may commence after the compression was finished. Please confirm the flashing procedure with YES (as shown, in caps), followed by <key>Return</​key>​.
  
 You need to power-cycle your Amiga after flashing. You need to power-cycle your Amiga after flashing.
Last modified: le 2019/10/24 11:11